06 charger, viper 5900

My vehicle is a 2006 Dodge Charger SE w/ 3.5L The problem is that my remote has stopped controlling my alarm. When I press any button on the remote nothing happens at all, not even the beeps telling me the car is out of range. This morning I remote started my car and then unlocked the doors with the remote. When I got to work, I couldn't arm the alarm, pop the trunk, start the car, etc. I checked the plug on the antenna. I just have no clue what this could be. The remote shows full battery life, and shows the system is unarmed. When I push the buttons, the transmitting icon lights up. Any suggestions guys? And thank you ahead of time for your time.

have you tried re-programmin the remote? there are alot of possible causes, but you can try that first, it's the easiest thing, if it fails then we can start the troubleshooting!commit your way to jehovah and he will act in your behalf. psalms 37:5

Okay, I'll try that, and let you know how it goes. Thanks

Sweet. That worked. Thanks so much for your help. Now I feel a little silly it was that easy. Haha.

Hello everyone. I am having problems with the bypass in my car. I have a 2006 charger with a Viper 5900. The bypass I am using is a CHDL7-PK2. The immobilizer bypass feature is working fine, but the data controlled features (ie. locks and trunk pop) are not. I was just going to direct wire these functions to the car using resistors like it should be done. My question is if this is how I am supposed to wire the door locks? Thank you in advance for your responses guys, and I apologize if the question is stupid.