wiring diagram for an omega max e alarm

Home / the12volt's Install Bay / Car Security and Convenience / wiring diagram for an omega max e alarm (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

steveosgrl7

Member - Posts: 4

Joined: May 29, 2009

Location: Ohio, United States

Posted: May 29, 2009 at 5:24 PM / IP Logged

I have an 05 Cavalier. I need to know how to install my Omega Max E alarm. It has remote start. I bought the alarm without a manual. Any input would be appreciated. I am at a loss. Thanks

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: May 29, 2009 at 7:24 PM / IP Logged

http://www.caralarm.com/manuals/Omega%20-%20Generic/MAX-E.pdf	Battery	RED	(+)	IGNITION SWITCH HARNESS
	Ignition 1	PINK	(+)	IGNITION SWITCH HARNESS
	Ignition 2	WHITE	(+)	IGNITION SWITCH HARNESS
	Accessory 1	ORANGE	(+)	IGNITION SWITCH HARNESS
	Starter 1	YELLOW	(+)	IGNITION SWITCH HARNESS
	Anti-Theft Type	GM PASSLOCK II® ANTI-THEFT SYSTEM
	Anti-Theft Descript	THE BCM MODULE MUST SEE A SPECIFIC RESISTANCE VALUE BEFORE THE VEHICLE WILL START PROPERLY
	Key Sense	LIGHT GREEN	(-)	IGNITION SWITCH HARNESS
	Neutral Safety	YELLOW	(-)	IGNITION SWITCH HARNESS
	Tachometer	WHITE	(-)	LARGE HARNESS ON FRONT OF ENGINE
	Speed Sense	DARK GREEN / WHITE	(AC)	AT PCM MODULE UNDER HOOD ON PASSENGER SIDE FIREWALL
	Parking Lights	BROWN	(+)	AT VEHICLE LIGHT SWITCH
	Brake Lights	WHITE	(+)	AT SWITCH ABOVE BRAKE PEDAL
	Reverse Lights	LIGHT GREEN	(+)	IN HARNESS IN DRIVERS KICKPANEL

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: May 29, 2009 at 7:28 PM / IP Logged

< color=#008000>www.the12volt.com/installbay/uploads/D65_< color=#008000>max< color=#008000>-< color=#008000>e< color=#008000>.pdf -

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: May 29, 2009 at 7:30 PM / IP Logged

< color=#008000>www.the12volt.com/installbay/uploads/D65_< color=#008000>max< color=#008000>-< color=#008000>e< color=#008000>.pdf -

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: May 29, 2009 at 7:32 PM / IP Logged

HMMMM...Sorry for that garbled mess...The preview looked fine...Anyhow just use the search feature and your all set...!

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

steveosgrl7

Member - Posts: 4

Joined: May 29, 2009

Location: Ohio, United States

Posted: May 30, 2009 at 8:16 AM / IP Logged

Thank you soo much!

steveosgrl7

Member - Posts: 4

Joined: May 29, 2009

Location: Ohio, United States

Posted: May 30, 2009 at 8:40 AM / IP Logged

ok, at a road block... I have a purple wire and a royal blue wire on the harness, where do they go? The white wire seems to be the only wire that triggers the horn, there is also a fuse on it. Is it the only power source out?

all you need in life is duct tape and zip ties

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: May 30, 2009 at 8:49 AM / IP Logged

If your referring to purple in pin 12...n/c...again if it is blue in 13 pin harness...no connection...Be more specific...the white on the 4 pin harness is for parking lights

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: May 30, 2009 at 8:51 AM / IP Logged

Nevermind that post...Wrong install manual...but be more specific...what is the wiring desription of wire...

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

steveosgrl7

Member - Posts: 4

Joined: May 29, 2009

Location: Ohio, United States

Posted: May 30, 2009 at 10:37 AM / IP Logged

The wiring harness is white and has 8 prongs. Need to know how to wire the harness to the car. Get power to the system but none of the functions are working. The sensor will not come on, and the system will not arm itself. Know the system works. If you need more info just ask.

all you need in life is duct tape and zip ties

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.