the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

priority lock w/aftermarket sctuators

Home / the12volt's Install Bay / Car Security and Convenience / priority lock w/aftermarket sctuators (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
00sonoma 
Member - Posts: 39
Member spacespace
Joined: February 10, 2008
Location: Pennsylvania, United States
Posted: June 04, 2009 at 2:02 PM / IP Logged  
putting a viper 791xv in my 88 stang, have the 451m module and 2 wire dei actuators in door from previous alarm.
how would go about wiring it up?
00sonoma 
Member - Posts: 39
Member spacespace
Joined: February 10, 2008
Location: Pennsylvania, United States
Posted: June 04, 2009 at 3:42 PM / IP Logged  
sorry meant 690xv
00sonoma 
Member - Posts: 39
Member spacespace
Joined: February 10, 2008
Location: Pennsylvania, United States
Posted: June 06, 2009 at 7:56 PM / IP Logged  
anyone?priority lock w/aftermarket sctuators -- posted image.
00sonoma 
Member - Posts: 39
Member spacespace
Joined: February 10, 2008
Location: Pennsylvania, United States
Posted: June 08, 2009 at 6:11 PM / IP Logged  
oh well guess it cant be done
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: June 08, 2009 at 6:23 PM / IP Logged  

sure it can, i haven't used a 451 in a while, if i remember correctly, violet and violet/black- 12 volts permanent

brown black and WHITE/ black- ground

blue/black and GREEN/ black actuators

and the three pin harness onto the corresponding port on the 791xv brain.

00sonoma 
Member - Posts: 39
Member spacespace
Joined: February 10, 2008
Location: Pennsylvania, United States
Posted: June 08, 2009 at 6:42 PM / IP Logged  
im trying to lock both on arm and just the driver on 1 press of unlock the pass on 2nd unlock
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: June 08, 2009 at 6:56 PM / IP Logged  

ok here's what you do, remove the driver actuator unlock motor leg from the original setup,and using a relay connect like this

pin 87 and 86- twelve volts

pin 87a- ground

pin 85- connect the unlock wire of the alarm ( green)

pin 30 connect unlock leg or actuator

and on the original setup where u disconnected the unlock wire connect the second unlock in it's place

00sonoma 
Member - Posts: 39
Member spacespace
Joined: February 10, 2008
Location: Pennsylvania, United States
Posted: June 08, 2009 at 7:44 PM / IP Logged  
awesome thanks for the info

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer