95 civic window module wiring

i need help with wiring a window roll up module for a 95 honda civic. i check the wiring diagram at this site and it said for windows up- LF=RED / blue, RF= blue / YELLOW and for windows down- LF=RED / yellow, RF= blue/green. but i don't know what the wire is for the left and right motor wire. i bought my window roll up module at www.hpdistributinginc.com. all i want to do is have two of my windows to roll up when i arm my car. this is the wiring diagram it provides me.

pink- to accessory item

green- left motor

white- left switch

orange- 500ma. activation

black- ground

red- +12 volts

blue- right motor

brown= right switch

what is the pink wire for anyways?

any suggestion would help

|  LF WINDOW UP/DN|RED / yellow - RED / blu|A  |drivers door                |

The above colors is what I have for the 1995 Honda Civic. Check with a DMM for proper wires while toggling the switch to activate the windows. You will not need a relay but you will need to hook up the starter disable wire to the ORANGE activation wire on the module. When you are the system, the windows will automatically roll up. The Pink wire to my knowledge is a (-) output to any ACC item, but correct me if I'm wrong. I have heard that this connects to a IGN source but I have never done so in any of the units that I have installed.