02 nissan frontier remote start issue

When I autostart the vehicle, then put the key in the ignition and turn to the on position, the starter engages?  and when I turn it back  off in remote start mode, it engaes as well.

I ran the second starter wire through a relay and i disconnected that one and it still did it.... How would I wire the relay???  does it go to the original starter wire???

what type of system are you using? here's a general fix! using a relay wire like this

pin 30- cut true starter wire in half and key side connects here

pin 87a- other side of starter wire

pin 86- ignition

pin 85- ground while running wire (assuming your unit has one),

if you are using a dei module with the xcrs, let me know!