UltraStar 2250 problem, Leds stay on
Home /
the12volt's Install Bay /
Car Security and Convenience / UltraStar 2250 problem, Leds stay on (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: March 28, 2003 at 8:54 PM / IP Logged
Hello Guys,
I installed an UltraStart 2250 alarm. It was working allright for a week. But last night I couldn't arm it.
The antenna leds stayed on all night. When I press the lock button the lights spark once but the siren won't chirp. If I open a door the alarm won't Trigger.The alarm is not arming, i don't know what happened, it worked OK for a week.What could've gone wrong if it was working allright???If somebody had this same problem please let me know.
I appreciate your help. Thanks
Posted: March 29, 2003 at 9:35 AM / IP Logged
Posted: March 29, 2003 at 8:32 PM / IP Logged
Posted: March 30, 2003 at 10:53 PM / IP Logged
Sorry for my stupid question. It was on valet mode
I just did not thought of that because I don't remeber putting it on Valet Mode.
Thanks a lot for your help guys
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
