viper 1002 needed

Home / the12volt's Install Bay / Car Security and Convenience / viper 1002 needed (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dx90

Member - Posts: 47

Joined: June 04, 2009

Location: United Kingdom

Posted: September 03, 2009 at 2:26 PM / IP Logged

I fitted my alarm and all was working well except for the 1st worn away stage on the built-in anti-shock was not working. Full impact was. I didn't mind this, rather than take it out and send it back.

Now I have a new problem.

The blue LED stopped working and when I open the doors with the key to set the alarm off the alarm doesn't work any more. I have also tried the alarm by opening the bonnet press the switch down arm the car and then release the switch. Still no alarm.

The remote locks through the alarm still work fine.

Anyone know what the problem could be please?

Or who to get in touch with in the UK to get it repaired under guarantee?

Thanks

BMW E36 320I August build 1995

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: September 03, 2009 at 8:30 PM / IP Logged

Could it be in valet mode? The led shuts off some time after the alarm has been in this mode for an extended period!

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

dx90

Member - Posts: 47

Joined: June 04, 2009

Location: United Kingdom

Posted: September 05, 2009 at 5:29 AM / IP Logged

Hi t&t tech

Spot on with the alarm being in valet mode. The switch is hidden up behind a panel. Not sure how it got knocked when ignition was on, but it must have been some how and switched it to valet mode.

Thanks for your help.

BMW E36 320I August build 1995

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 1002 needed

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.