valet 712t for 97 altima

Home / the12volt's Install Bay / Car Security and Convenience / valet 712t for 97 altima (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hsmitty99

Member - Posts: 3

Joined: September 07, 2009

Location: Tennessee, United States

Posted: September 07, 2009 at 4:00 PM / IP Logged

Hi guys, I'm trying to wire the door lock/unlock remote feature for my daughter's '97 Nissan Altima with factory power locks but no factory remote. I have the factory wiring diagram but I couldn't figure out how to wire the Valet 712T since the instructions are not very useful. Thanks for the help.

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 07, 2009 at 5:03 PM / IP Logged

What info do you have for the car? Positive or negative? 5 wire, reversal??? There is a manual for that alarm on this site. Just tell me what you can about the car's locking system.

Following is for my info. So I will know the wire colors.

nvzack wrote:

the wire colors and labeling from the 712t keyless brain are as follows

GREEN/ black stripe lock #30 common (output)

WHITE/ black stripe lock #87 normally closed

violet/black stripe lock #87 normally open (input)

blue/black stripe unlock #30 common (output)

BROWN / black stripe unlock #87a normally closed

violet unlock #87 normally open (input)

Back to Top

hsmitty99

Member - Posts: 3

Joined: September 07, 2009

Location: Tennessee, United States

Posted: September 17, 2009 at 5:31 PM / IP Logged

Thanks a bunch for the quick reply. I travel a lot and only have weekends to work on the car, so I was hoping somebody had already done this installation and could advise me. I'll have to follow the guide on this site to determine which kind of locking system I have and post it.

Back to Top

hsmitty99

Member - Posts: 3

Joined: September 07, 2009

Location: Tennessee, United States

Posted: September 19, 2009 at 2:53 PM / IP Logged

After following the instruction guide on this site, I have discovered the car has a 3 Wire Negative system. Any help from this point is appreciated.

Back to Top

i am an idiot

Platinum - Posts: 13,670

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 19, 2009 at 7:23 PM / IP Logged

GREEN/ black of the alarm to the Blue/Blue wire of the car.

Blue/black of the alarm to the Gray/Red of the car.

Ground the Violet and Violet/Black of the alarm.

Location of the vehicle wires are on the following page. https://www.the12volt.com/installbay/alarmdetail/1610.html

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

valet 712t for 97 altima

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.