2007 chrysler 300 base

Hi guys, First I want to thank you guys for all your help, even though you didn't know it lol. I installed a Clifford 50.5x in my 2001 Silverado by reading this site last year, and it's awesome! I want to install a system in my wife's 300 base, but I want to install an alarm first of course. I've read through the site but it seems the 300 is going to be a lot more fun then my truck lol. I have the wiring diagram from this post: https://www.the12volt.com/installbay/forum_posts.asp?tid=105440&KW=StealthEs Just wanted to make sure this is the one I need to sink my head in? My main issue right now is the bypass / databus / doorlock module. I don't want to give up a key, and when I go to bypasskit.com i'm not real sure which one(s) to get for her car. I have two alarms 50.5x & a 50.7x. I thought about putting the 7x in my truck and giving her my 5x or just slap the 7x in her car. Honestly id rather the one that will be easy go in her car if there is a difference. Any insight would be appreciated. I may be in over my head, but I want to try this anyway, I've always been a DIY person. Thanks, Rich

Wow thanks Tommy, I just ordered the FL532. I'll post my progress when I get it in and start working on this. Thanks again, Rich

Sounds good...Your Welcome and Good Luck...!M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

I grabbed the install doc for the FL532, and it looks like I'll be using option 7 for the install. Are they reversed? As in when it says Yellow/Black Door Status (-) output That goes to the Alarm/RS (-) Door Trigger input? or Pink Ignition (+) Input goes to the (+) Ignition output on the Alarm/RS? I'm not sure what to do with the Panic (-) input brown wire. And I think the E-Brake (-) output Green goes to the Neutral Safety switch input on the Alarm? Just want to make sure I understand the module. Thanks, Rich

Am I on the right track with the wiring Tommy? I tried to register on the Flash-it.com site and ask but I'm color blind and I can't make out the verification image so it denied me after a few tries. I hate those things lol. I really appreciate your help, and I'm pretty sure I'm on it, just don't want to mess up on her car or I'll be a dead colorblind man lol :-) Rich

lol...The wife is doing some work...When she gets off...Ill look over the manual and post...!M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Cool thanks man

Sounds like you have the door trigger and the ignition RIGHT...Instead of tagging the door trigger for alarm...The bypass will tell the alarm when a door is open...As far as the Ignition Input...I dont think it would matter if you tie it in the alarm/rs ignition output or the cars...They should both power up at the same time...But lets go ahead and connect it to the vehicles ignition...! You can try the D2D...If you have any issues...Go W2W...! Saves you some install time...But once when i called tech support for help...He suggested "for now,go w2w on dodges"...? And the e-brake connection...i can only assume its for Manual Transmissions...Again the bypass will tell the r/s that the emergency brake is set...instead of tagging the e-brake wire...!M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!