the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start on 2000 mustang


Post ReplyPost New Topic
< Prev Topic Next Topic >
Atl_monte 
Copper - Posts: 90
Copper spacespace
Joined: February 26, 2005
Location: Georgia, United States
Posted: September 19, 2009 at 10:26 AM / IP Logged  
I was working on installing an Clifford remote start on a v6 2000 Ford Mustang and was trying to locate the wire for the tach input, the wiring diagram says its a light GREEN / WHITE wire in the passenger kick panel but Im unable to locate a wire that fits that discription
chev104275 
Gold - Posts: 1,427
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: September 19, 2009 at 12:12 PM / IP Logged  
2000 Ford Mustang Alarm, Remote Starter
Tach Light GREEN / WHITE Power Control Module behind right Kick
TACH Any wire that is NOT RED or WHITE/ LIGHT BLUE   @ any IGNITON COIL or FUEL INJECTORS
If i Can't Install it    I Don't need it   Joe
Atl_monte 
Copper - Posts: 90
Copper spacespace
Joined: February 26, 2005
Location: Georgia, United States
Posted: September 19, 2009 at 12:37 PM / IP Logged  

chev104275 wrote:
2000 Ford Mustang Alarm, Remote Starter
Tach Light GREEN / WHITE Power Control Module behind right Kick
TACH Any wire that is NOT RED or WHITE/ LIGHT BLUE   @ any IGNITON COIL or FUEL INJECTORS

found a GREEN / WHITE wire in kick but it didn't show any RPM when I connected a dwell/rpm meter

chev104275 
Gold - Posts: 1,427
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: September 19, 2009 at 12:47 PM / IP Logged  
looks like you could use BROWN / yellow pin 74 or white pin 101 or tan pin 75 or BROWN / light blue pin 100 or tan/black pin 73 or light GREEN/ orange pin 99     any or those should work for you there all at the pcm   they are the pulses to the fuel injectors
If i Can't Install it    I Don't need it   Joe

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer