disarming problem

Home / the12volt's Install Bay / Car Security and Convenience / disarming problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tony0819

Member - Posts: 2

Joined: July 23, 2009

Posted: September 26, 2009 at 9:57 PM / IP Logged

i have a autopage rs850LCD, whenever the alarm is triggered, it will stay in the mode that tells you it has been triggered, so instead of 2 chirps upon disarm it turns into 4. is there a way to reset it back to 2 chirps without pulling the battery?

thanks in advance

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: September 27, 2009 at 12:03 AM / IP Logged

Normally, most alarms reset when the igntion is switched on! Key word in that sentence being normally!

commit your way to jehovah and he will act in your behalf. psalms 37:5

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: September 27, 2009 at 12:59 AM / IP Logged

So what your alarm is doing.... is "normal" function. And as t&t stated, it will reset with ign. pulsed.

tony0819

Member - Posts: 2

Joined: July 23, 2009

Posted: September 27, 2009 at 3:31 PM / IP Logged

turns out the igition wire from the brain isn't connected. Hence it wasn't acting normally. got that fixed, everything works as it should now. thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

disarming problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.