passlock 2 bypass confusion

I got this bypass for my 2000 gmc sonoma. In the instruction it says to hook up the blue wire to (-) While Running. What does this mean?

it may also be referred to as GWR or "status" output..... this for this terminology in your starters install guide.....Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Im sorry i left out all that info. Its an old Auto command remote starter, cant find a link to it anywhere. The bypass is from Fortin here's a link https://ifar.ca/en/products/obsolete/passlock-sl/

You are right Gerry, GWR is the term used.....I can't remember if Auto command has such a wire.....Auto command (Canadian Tire product...right?)Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

correct

Do you have the installation guide of your auto command?Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

syl20rochon wrote: Do you have the installation guide of your auto command?

Yes i do but I dont have a scanner to show you it

I'll be logged off for 2 hours or so...I'll log in later.....good luck...Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

the control harness on the starter has 10 wires. WHITE/ black ignition 3 (-)400ma BROWN / white alarm disable(-)400ma brown accessory pulse(-)400ma blue horn(-)400ma yellow lights(-)400ma orange brake (+)input violet hood (-)input green tach (-)input RED / white remote (-)input RED / black not used So do any of you guys know if this starter will even work with the bypass or do I have to buy a new starter?