remote sunroof open/close

where can I get the wiring diagram for this: I want to be able to open/close the sunroof of my 2001 Mitsubishi Galant, with my remote alarm; also I would like to get the folding mirrors to close automaticaly with the activation of the alarm. can anyone help with the wiring? thanks in advance.

Have you done any testing yet? To know what kind of polarity is being switched at the suroof and the mirrors!

The old FTO coupe had a wire on the switch where you applied a 1 sec pos pulse, this closed the mirrors. As for the roof I'm with t&t here. Also on that vehicle the windows are powered  (1 touch up-down driver's door) for 1 minute after turning off the ignition, does this also apply to the roof, in that case what you want isn't neccessary.  Also is there a trap in the roof?  i.e. it closes to about 4" then stops?

every mitsubishi i have ever done is a single negative pulse to open the roof if its a one touch open, and a negative threw a pulse timer relay set to about 8-10 seconds to close but the sunroof motor needs to have a constant 12v if your gonna open and close via remote. so a) you can run a 12v wire to the motor and get rid of the ignition supply or b) you can use another aux and turn the ignition on with a relay....i suggest a option a....

DIRECTED ELECTRONICS P/N# 529T will open your sunroof, it controls 1 window in 2 directions, or 2 windows in 1 direction, for more control, use a 530T, as it controls 2 windows in both directions, & it is not that expensive, maybe 30 bucks or so!