the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5501 doors unlocking overnight?


Post ReplyPost New Topic
< Prev Topic Next Topic >
sledslapper 
Member - Posts: 2
Member spacespace
Joined: October 17, 2009
Location: Ontario, Canada
Posted: October 24, 2009 at 9:29 AM / IP Logged  

Equipment: Viper 5501 + Idatalink

Vehicle: 2004 dodge Durango

Bypass type: Chip from key integrated to start

Issue: To bypass the factory alarm while starting, the installer programmed Viper to unlock/start/lock doors. This works, however I am now finding my doors unlocked every morngin when I walk out to the vehicle.

Thx

syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: October 24, 2009 at 6:56 PM / IP Logged  
This vehicule does not require a unlock before start then re-lock after start cause the oem factory alarm disarms with the ignition turning on...now, if he installed resistors to control the door lock , read the following:
Comments: * VEHICLE IS EQUIPPED WITH A TRANSPONDER ANTI-THEFT SYSTEM AND AN OEM ALARM. OEM ALARM DISARMS WITH IGNITION.
** DOORLOCKS ARE MULTIPLEXED: PURPLE / GREEN GROUND (-) THROUGH A 330 OHM RESISTOR FOR LOCK. GROUND (-) THROUGH A 100 OHM RESISTOR FOR UNLOCK. * DOORLOCKS ARE MULTIPLEXED: LT GREEN/ ORANGE GROUND (-) THROUGH A 620 OHM RESISTOR FOR LOCK/ARM. GROUND (-) THROUGH A 1500 OHM RESISTOR FOR UNLOCK/DISARM. DOUBLE UNLOCK PULSE REQUIRED, FOUND AT BLACK PLUG, LEFT OF THE BRAKE PEDAL. SEE DIAGRAM FOR PROPER CONNECTION.
If he uses the idata link module to control the doors lock, he can edit the module not to control the door lock passively.  Also make sure that the remote starter is set to active door lock and not passive, all these options can be program with the dei techtool or can be programmed with the push switch provided with the remote start. 
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer