04 jetta, viper 5901

Home / the12volt's Install Bay / Car Security and Convenience / 04 jetta, viper 5901 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 13, 2009 at 1:51 PM / IP Logged

HI I have one quick question regarding the clutch bypass on this car

it says To bypass the clutch , with a relay program for starter, shorting out the BROWN / White and RED / Black together, will this relay diagram be correct

pin 87 (to one of the clutch wires), pin 30 (to the other clutch wire), pin 85 (to Ground when running status), pin 86 (12 volts)

thanks for the help

Mike

Back to Top

wblakes

Copper - Posts: 202

Joined: February 03, 2004

Location: United States

Posted: November 13, 2009 at 3:30 PM / IP Logged

instead of using the "ground when running status output" you should just use the negative starter output to bypass the clutch. that way the clutch is only bypass when the car is starting and not bypassed the whole time you remote start the car.

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 13, 2009 at 5:35 PM / IP Logged

okay will do, thanks for the help

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 13, 2009 at 7:32 PM / IP Logged

okay so, I am workign on a 2004 jetta, i am installing a viper 5901 and the idatalink ads-al-ca module

doorpin, trunkpin, trunk release, and foot brake work through the data connection, but the lock and unlock feature do not work, I find this wierd because usually it is the other way around, the bypass programmed correctly so I am kind puzzled by this

anyone have any suggestions

Mike

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 13, 2009 at 10:32 PM / IP Logged

anyone run into this issue before?

Mike

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 16, 2009 at 10:05 PM / IP Logged

anyone have any info on this

Mike

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 18, 2009 at 8:05 AM / IP Logged

What cable are you using for the D2D ? or are you using W2W ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 18, 2009 at 3:42 PM / IP Logged

I am using it in D2D and it is the cable that is made to connect DEI products to the idatalink bypasses

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 jetta, viper 5901

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.