viper 5702 unable to disarm with remote

Home / the12volt's Install Bay / Car Security and Convenience / viper 5702 unable to disarm with remote (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wgrassie

Member - Posts: 8

Joined: November 03, 2009

Location: Ontario, Canada

Posted: November 16, 2009 at 2:19 PM / IP Logged

1993 Sentra GXE

Hi

I installed th Viper 5701 in my 1993 Sentar GXE- experiencing the following issue:

Remote Learn (Default Setup) completed succesfully - alarm sounds etc.
The system arms -doors lock
System will not disarm with remote
Turn the ignition key to on and the alarm sounds- Thanks

Any help would be appreciated-Thanks

Thanks for your help

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: November 16, 2009 at 3:25 PM / IP Logged

Have you programmed the remote to the default setting?

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: November 16, 2009 at 11:05 PM / IP Logged

you usually have to program it to the standard configuration in the manual I believe (disregard my post, I thought you were trying to program additional remotes to the brain)

Back to Top

yimke

Copper - Posts: 417

Joined: June 23, 2009

Location: Nebraska, United States

Posted: November 17, 2009 at 2:24 PM / IP Logged

disarm it for now by turning the ignition on and pressing the valet button once (if you did not change the setting)

The valet button is on the antenna receiver.

Back to Top

wgrassie

Member - Posts: 8

Joined: November 03, 2009

Location: Ontario, Canada

Posted: November 17, 2009 at 10:20 PM / IP Logged

1993 Sentra GXE

Alarm deactivated with Valet Key

Remote Learn (Default Setup) completed succesfully - alarm sounds etc.
Reset features to factory default
System will NOT arm or disarm with remote

When I try to program the remote;

press f for 12 seconds
remote emits 1 long beep
I press and hold unlock command for 1.5 secs
remote beeps twice and stays on
The arm, disarm and remote start & aux leds DO NOT turn on

Any help would be appreciated-Thanks

Thanks for your help

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5702 unable to disarm with remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.