compustar parts

hey Jeff,

its the pro2wfms. from what i was checking out, the brain is a CM5200, which only does remote start. i was actaully looking to buy the pro2wfmas, but then again this unit was given to me.

Jeff, does the compustar brains all use the same wiring, just the brain is differant? i installed a pro into my moms car awhile back, but i forgot what it was like.

You can make the 5200 into a passive alarm system by turning on the alarm feature with the OP500 programmer. This will give you door and trunk and also impact or perimeter sensor alarm as well if you add these into the system. You can hook this into the horn output or add a siren instead. The only difference between the CM5200 and the CM5000 is the fact that the CM5000 has designated outputs for shock sensors and also has the ability to give you specific paging outputs to the 2 way remote such as hood, trunk, doors, impact or AUX input ( perimeter. tilt, etc ).

All the 5200 and 5000 CPU's have the same wiring for the CN1 and CN2 harnesses as well as the door lock harness and antenna. The only thing is the knock sensor and the impact sensor will not be available on the CM5200 CPU.

alright, thanks for the info. would u happen to have the antenna for it? if so how much for that to be shipped to L9T0A8  thanks jeff, appreciate the info.