the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5901, 2001 dodge ram


Post ReplyPost New Topic
< Prev Topic Next Topic >
dhutch 
Member - Posts: 1
Member spacespace
Joined: September 22, 2008
Location: Alaska, United States
Posted: November 28, 2009 at 4:42 PM / IP Logged  

I have an '01 Dodge ram Diesel auto with keyless entry. I've installed a viper 5901 alarm/remote start and seem to have everything working except for the door locks. I tried using the 5 wire reverse polarity diagram and when I hit the lock/unlock button on the remote, the truck does just the opposite. I've switched wires around with no luck. I did check the wires at the switch and noticed I have two wires that are 12v+ when I hit the switch, each at a time. I also have a contstant power supply and a BLACK/ green stripe wire that I imagine is a ground, but doesnt seem to do anything. That being said, I tried wiring using the 3 wire relay system with no luck. During all of this, the door panel switch works fine. I do have the alarm arm/disarm hooked up to a single wire and I'm using a 1500 and 644 resistor as listed in the alarm install directions.

Any help is greatly appreciated.

monty_77 
Copper - Posts: 491
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 15, 2009
Location: North Dakota, United States
Posted: December 04, 2009 at 9:13 AM / IP Logged  
you should be going to the keyless module and not wiring the reverse lock method. heres the info i got if you need the picts to find it message me and i will send it to you.
Lock = 670 Ohms Unlock 1.5 Kohms to neg pulse, first unlock will only disarm and trig the dome light but it's not
gonna unlock the Truck. program the unit for double pulse unlock. .If no keyyless on the truck door lock are
ORANGE / Purple (Rev) and Pink/Purple (Rev) in the driver's kick panel or the rubber jam boot from the driver's door.
KeyLess it's located a the right side of the steering collumn. with 2 green plug on it.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer