python 1601 mustang

Home / the12volt's Install Bay / Car Security and Convenience / python 1601 mustang (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

godshandkiller

Member - Posts: 15

Joined: June 29, 2005

Location: United States

Posted: November 28, 2009 at 6:04 PM / IP Logged

im installing a python 1601 in my 2000 mustang gt i have the alarm and the door locks and trunk pop working fine but the wiring for the remote start is confusing me this is the wiring for my car

Constant 12V+	Yellow or Light GREEN/ Purple	Ignition Switch Harness
Starter	WHITE/ Pink	Ignition Switch Harness
Ignition	RED / Light Green	Ignition Switch Harness
Ignition 2	Gray / YELLOW	Ignition Switch Harness
Accessory	Gray / YELLOW	Ignition Switch Harness

and the wires on remote start harness,pink-ignition 1 (+)output,RED / white-fused 30a,orange accessory output,violet starter output,green starter input,red 12v constant fused 30 a input,pink/white flex relay output,pink/black flex relay contact 87a,RED / black fused 30a (for starter and accessory relays).any help would be appreciated

Back to Top

Search for other posts by godshandkiller

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: November 28, 2009 at 6:12 PM / IP Logged

RED / white, RED / black, and red all fuse at thirty amps connect to the ignition harness twelve volts constant,

Cut your WHITE/ pink starter wire in half, Green to the side from the keyswitch purple to the other side,

RED / light green connects to the pink wire from your relay,

gray / YELLOW, ignition two, to the pink/white

gray / YELLOW, accesory, to the orange wire,

isolate the pink/back not neccesary in this application!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

python 1601 mustang

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.