06 town and country ignition wire loc

Where is the best place to grab the ignition wires. I looked in the column and the wire colors didn't match any diagrams I have. I have an Audiovox one, Direct wire, and the on off this site there all the same. Where I looked, Key cylinder is on the right side of the column and it connects to the ignition switch on the left. I found Starter 1, Ignition 1, and I think acc. I can't find the key sense wire or the second starter wire. I will be using PKUMUX since the owner has an all in one keyfob/ignition key. Should be an easy install it was my 6th car today and we didn't have the bypass in stock so I will be doing it next Saturday. Was hoping to get the starter in but I gave up and called it a night. P.S. Starter is a Valet 562T

key sense wire and second starter are the same PURPLE / brown at the ignition harness

Ok I got the starter done but the factory keyless doesn't work when the vehicle is remote started. Did I miss an accessory wire? I have Pink/White, Yellow, And I think Violet/orange not sure because some of the accessories run without this wire. I don't have the van in front of me and won't until Saturday when I go back to my brothers. I thought it wouldn't work because the vehicle is running but it works with it running on the key. I should have made him get the other key so I could finish it the first time. Thanks for the help.

I did one today and only hooked up the ignition, and starter 1, and it started up just fine multiple times. Factory keyless worked with the car running as well. I used a 556u on it though, and it had regular keys with a separate fob for keyless.A DMM is a beautiful thing.

MECP Advanced Installer Certified.