01 saturn sc2 keysense trouble

Home / the12volt's Install Bay / Car Security and Convenience / 01 saturn sc2 keysense trouble (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ncollicott

Member - Posts: 5

Joined: December 07, 2009

Location: Wisconsin, United States

Posted: December 08, 2009 at 7:55 PM / IP Logged

the keysense wire must see a negative during remote start to keep service engine lite from coming on??? i really do know much about relays at all. and iv tried following other post but i really dont understand ....if somebody could please help me understand how to fix this problem i would really appreciate it. i dont know how relays are wired and/or where to purchase the correct relay. my remote starter is bulldog security remote starter. model RS82. please help me out. thanks alot

-Nick

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: December 09, 2009 at 1:11 AM / IP Logged

You don't even need a relay; should be just two diodes.

This Bulldog unit should have some sort of output that makes a ground when the remote starter is on.....it should be already connected to whatever you're using for your Passlock II bypass, right?

You just need to split that output with two ordinary diodes (Radio Shack or wherever).

First, cut the connectiong between the RS82 and your bypass module.

Connect the striped end of two diodes to the RS82's GWR (ground-while-running) output.

Connect the other end of one diode back to your Passlock bypass like it was before.

Connect the end of the other diode to the car's keysense wire.

Back to Top

Hellraiser319

Member - Posts: 13

Joined: September 01, 2004

Location: United States

Posted: December 09, 2009 at 10:19 PM / IP Logged

That or if the RS has a - IGN3 output you could probably just wire KS to that as well.

Back to Top

zerepdivad

Silver - Posts: 605

This member has made a donation to the12volt.com. Click here for more info.

Joined: July 03, 2006

Location: Wisconsin, United States

Posted: December 09, 2009 at 10:30 PM / IP Logged

^ no those pos things only have a single status out. I've done like 3 of those in the last 2 weeks.

A DMM is a beautiful thing.

MECP Advanced Installer Certified.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

01 saturn sc2 keysense trouble

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.