adding powerlocks,keyless entry and alarm

Well after install many of stero's,wiring phone system,etc I though I could install powerlocks on my 07 f150 xl.I have a basic understanding on how this alarm works but I have a few questions. First her is the diagrams I have to look at. < color=#22229c>http://tintnelectronics.com/manuals/aga1001.pdfLike I said I have installed the power locks in the door panels but I do not know how to hook them up the the brain. Do i use relays? or do I just connect a lock wire and a unlock wire to the lock motor? If I do use a relay do Can i daisy chain the unlock output and the lock output? Also what type of hook up do I use on the relays? Once I can get that firgured out I just wire the rest of the brain up to the information I have for the wiring diagram for my truck. 12V to the ignation, Find lights,etcI`ve gotten this farm and my wife is on my back about "should have just brought it to bestbuy" but hey 8 beers and i`m feeling good I got the door panels off =)

https://www.the12volt.com/doorlocks/page3.asp#arpA DMM is a beautiful thing.

MECP Advanced Installer Certified.

Re the lock wires question. How about telling us what make of alarm etc, also did you buy the actuators in a kit with a relay also make of actuator and motor wire colours please.

Forgot about the name of the alarm.. Its a aga1001 and yes the lock motors came with the kit but the kit only came with one relay. And i think thats for the kill switch

How many terminals on the relay? The point is if the alarm only has two or three lock wires you're going to need 2 relays or a lock control module.

Sorry, I just looked at your diagramme, it's Fig 2 and where the green and blue motor wires go, just extend the green and blue from any other motors to those two.