2001 grand am, viper 5701

Im installing a Viper remote start in a 2001 pontiac grand am. Wondering If I hooked up all wires correctly. When I go to start the car the radio and fuel pump turn on but doesn't start. I hooked up an XK01. Here's how I hooked up the 10 pin connector.             Harness Vehicle Pink Ignition 1- Pink RED / white-N/A Orange-Orange Violet starter car side-Yellow Green starter key side-Yellow Red 12V-Red Pink/White-N/A Pink/Black-N/A RED / Black-N/A Not sure if the other power wires needed to be connected and what there function would be. Thank YouPete

pink/white must also be connected to your second ign. in that car. After you've made the connection, put the key the ignition and see if it remote starts. If yes, then remove the key and try again. If it doesn't start the 2nd time, double check your bypass wiring.

Thank You will try that sometime this week and let you know the outcome.Pete

RED / black needs to see constant 12 volts and if you use 2nd ignition(pink/white), the RED / white needs to see constant 12 volts

vipersport328 wrote: Do I need to hook up any of the remote start output   Relay out of the 5 pin connector. Thanks

the status output (blue) should be hooked up to the bypass mod.

Thank you Hooked up those wires on the Remote start and the car started everything is working thanks again. Pete