ca 500 code alarm programming remote

I had a tough time finding information on how to program an additional remote for my ca-500. CodeAlarm Customer service was great: turn ignition on push button 3 times hit lock on remote (should hear click) hit button one more time hit unlock on remote (should hear click/s) hit button one more time hit trunk button (should hear click) hit button one more time hit start button (should hear click) turn off key Button is wired to blue two pronged connector (the shop that installed ours kept the button, so i used two wires with leads that fit the pins hope that helps someone!

Thanks for the post... I almost always use Code pieces...! I dont recall having to hit each button...That was last years model i believe...But glad you got it...!M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!