command start 290i manual

Home / the12volt's Install Bay / Car Security and Convenience / command start 290i manual (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lenl

Member - Posts: 4

Joined: December 28, 2009

Location: Manitoba, Canada

Posted: January 01, 2010 at 12:17 AM / IP Logged

Good day, I am looking for an installation manual for a Command start 290i, I had looked through this great forum and found car wiring diagrams but could not locate the unit install instructions.

I am looking to install a new remote start in the car and feel the instructions would help identify the wires.

Thank you

Larry

rrightaway

Member - Posts: 1

Joined: April 13, 2009

Location: Ontario, Canada

Posted: January 02, 2010 at 5:22 PM / IP Logged

heres the wiring diagram for the 290i unfortunately its all i could find im my files hope this helps ,i also included programming guide for the 270i they should be close . if pics dont go through email me and ill send them direct to your mail ricksandra@tbaytel.net rickd

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 03, 2010 at 1:04 PM / IP Logged

Same as the Command Start CS310i

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

lenl

Member - Posts: 4

Joined: December 28, 2009

Location: Manitoba, Canada

Posted: January 03, 2010 at 4:04 PM / IP Logged

Thank you very much.

Larry

lenl

Member - Posts: 4

Joined: December 28, 2009

Location: Manitoba, Canada

Posted: January 05, 2010 at 9:47 PM / IP Logged

Well I cut the sensor wire and that seemed to stop the random starts. The installer hid it quite well, under one of the plastic wire covers. I would guess this will eliminate the cold start feature. At least the command start is working!

Thanks to all!

Larry

nocrankcase777

Member - Posts: 3

Joined: February 05, 2010

Location: Alberta, Canada

Posted: February 24, 2010 at 2:34 PM / IP Logged

Hey Jeff, You wouldn't happen to have the complete operators/programming manual for the CS310i? If you do could you email me a copy to j_k_c-s@hotmail.com Thanks, James

Search for other posts by nocrankcase777

jmcstevenson

Member - Posts: 1

Joined: May 16, 2010

Location: Alberta, Canada

Posted: May 16, 2010 at 11:45 AM / IP Logged

Hi, I have an old CS275i that I need the installation/programming manuals for. I'm guessing it'll be pretty close to the 270i which you said you have copies of? Could I bother you to send them to me at jmcstevenson@gmail.com ? Thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

command start 290i manual

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.