no 2 way feedback? 580 4202p

Home / the12volt's Install Bay / Car Security and Convenience / no 2 way feedback? 580 4202p (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

thirtypackjack

Member - Posts: 3

Joined: December 16, 2009

Location: Massachusetts, United States

Posted: January 10, 2010 at 12:10 PM / IP Logged

Just got a Python 580 (4202P). Both remotes can lock, unlock, start, stop, pit stop, etc. Only issue is the 2 way remote never gets feedback. Only getting out of range error. Any thoughts?

Thanks

Thanks,

ThirtyPackJack

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: January 10, 2010 at 1:47 PM / IP Logged

Try re-programming the remotes if it fails, diconnect power from the unit for a couple minutes and then try!

commit your way to jehovah and he will act in your behalf. psalms 37:5

Thack79

Silver - Posts: 526

Joined: December 02, 2003

Location: Virginia, United States

Posted: January 11, 2010 at 2:40 PM / IP Logged

you may have a deffective/wrong antenna. had the same issue with a 2way avital 5303

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: January 11, 2010 at 5:24 PM / IP Logged

Or as thack said!

commit your way to jehovah and he will act in your behalf. psalms 37:5

nitroxdm

Member - Posts: 5

Joined: January 11, 2010

Posted: January 11, 2010 at 5:47 PM / IP Logged

Do you have just the one unit?

I have two cars that both have a DEI Matrix 3.2 installed. If there in the same area I have the same issue.

Once they are separated there isn't an issue.

thirtypackjack

Member - Posts: 3

Joined: December 16, 2009

Location: Massachusetts, United States

Posted: January 12, 2010 at 6:26 AM / IP Logged

Thanks for all the responses! I tried reprogramming the remotes all seems fine except the 2way never provides the confirmation chirp. I'm thinking its a hardware problem now....but I'll try rebooting

Only have one car.

Thanks,

ThirtyPackJack

thirtypackjack

Member - Posts: 3

Joined: December 16, 2009

Location: Massachusetts, United States

Posted: January 12, 2010 at 9:14 PM / IP Logged

Tried rebooting and reprogramming, same result - no confirmation chirp. My first one of these - anyone have any idea if these are problematic? If so what part is most likely the cause?

Thanks,

ThirtyPackJack

Thack79

Silver - Posts: 526

Joined: December 02, 2003

Location: Virginia, United States

Posted: January 13, 2010 at 8:04 AM / IP Logged

switch the antenna with another one. i had the EXACT same problem before however the customer didnt really care, as long as it worked. Believe the antenna is a 548t i believe and i had an older one (same model number and everything) and it was doing the same thing you are describing.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

no 2 way feedback? 580 4202p

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.