the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

oem disarm

Home / the12volt's Install Bay / Car Security and Convenience / oem disarm (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
harleyrob 
Member - Posts: 17
Member spacespace
Joined: May 01, 2007
Location: Utah, United States
Posted: January 12, 2010 at 2:49 PM / IP Logged  
installed a pro9776n with an fl-can module in a 2008 Dodge Ram 2500 diesel every thing works, except when you remote start the vehicle it sets off the factory alarm,any ideas on how to disarm the factory alarm?
zerepdivad 
Silver - Posts: 605
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: July 03, 2006
Location: Wisconsin, United States
Posted: January 12, 2010 at 3:10 PM / IP Logged  
Hook up keysense.
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
harleyrob 
Member - Posts: 17
Member spacespace
Joined: May 01, 2007
Location: Utah, United States
Posted: January 12, 2010 at 3:28 PM / IP Logged  
I am using an idatalink it is hooked into the PURPLE / brown mux wire that is giving me door locks,door pins,brake signal,data/muxstarter control is supposed to give oem arm and disarm,but factory alarm triggers on remote start any ideas for a factory disarm wire?
zerepdivad 
Silver - Posts: 605
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: July 03, 2006
Location: Wisconsin, United States
Posted: January 12, 2010 at 3:33 PM / IP Logged  
Yeah keysense. take apart your key so it's just hte plain casing and metal key and stick it in the ignition not turned. Then lock it wait for it to arm and you'll see the alarm will likely not go off. Therefore you will want to hook up keysense.
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
harleyrob 
Member - Posts: 17
Member spacespace
Joined: May 01, 2007
Location: Utah, United States
Posted: January 12, 2010 at 3:41 PM / IP Logged  
keysense wire is the PURPLE / brown it is also the mux wire and it is hooked up I still trigger factory alarm on remote start
zerepdivad 
Silver - Posts: 605
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: July 03, 2006
Location: Wisconsin, United States
Posted: January 12, 2010 at 3:44 PM / IP Logged  
did you hook up an 8.5k resistor on it and trigger it with factory disarm or status output? The modules don't ALWAYS do EVERYTHING.
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
harleyrob 
Member - Posts: 17
Member spacespace
Joined: May 01, 2007
Location: Utah, United States
Posted: January 12, 2010 at 4:26 PM / IP Logged  
Sorry the module was supposed to give me OEM arm and disarm, Thanks for the resistor value that did the trick everything works fine now Thank You VERY MUCH!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer