the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dlpkgm in 2006 cobalt


Post ReplyPost New Topic
< Prev Topic Next Topic >
metz35 
Copper - Posts: 458
Copper spacespace
Joined: January 13, 2003
Location: Pennsylvania, United States
Posted: January 17, 2010 at 9:20 AM / IP Logged  
my friend got this piece for his 2006 cobalt... i attempted an install yesterday , and the instructions didnt list cobalt.. but i found these instructions that list the cobalt
http://www.bypasskit.com/manuals/996_DLPKGM_H00_S00_D02_I_ENFR.pdf
my problem is that weather it was d2d or w2w, it didnt program, i held button plugged in plugs light came on, and as soon as the ignition was turned on the led just shut off.... its the first time i used one, so i dont know if it was user error, or the software version was wrong, or it just doesnt work with a cobalt... i used type 4 install... the software version is 1.0 any ideas????????
chev104275 
Gold - Posts: 1,427
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: January 17, 2010 at 4:01 PM / IP Logged  
according to bypasskit.com the dlpkgm only does these features for the cobalt
2006 Chevrolet Cobalt, DLPKGM
    *
      W2W
      DL-Arm Factory Security
      DL-Disarm Factory Security
      DL-Door Lock Control
      DL-Door Unlock
      DL-Driver Priority Unlock
      DL-Trunk / Hatch Release
    *
      D2D
      DL-Arm Factory Security
      DL-Disarm Factory Security
      DL-Door Lock Control
      DL-Door Unlock
      DL-Driver Priority Unlock
      DL-Trunk / Hatch Release
what are you using to bypass the PK3 system ?    what kind of system are you installing ?
ive used the dlpk modules on suzuki XL7 and KIA Sedona with no issues so far program first try   make sure the module is up to date i check before i install any of them i think its at 14.04 right now   you need the xkloader2 to program it
If i Can't Install it    I Don't need it   Joe
metz35 
Copper - Posts: 458
Copper spacespace
Joined: January 13, 2003
Location: Pennsylvania, United States
Posted: January 17, 2010 at 7:41 PM / IP Logged  
yeah i read that it only does locks and such, it was being used with an avital...im not really DEI friendly but i did remember the wire colors LOL. it just wouldnt program. im gonna check it at work tomorrow morning with my xk loader and see what the deal is..probablly gonna end up selling the guy a left over fortin piece, as im strickly a compustar and a blade AL guy
chev104275 
Gold - Posts: 1,427
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: January 17, 2010 at 8:25 PM / IP Logged  
that's what i usually use AVITAL 4103 and DLPK so far so good on Suzuki and KIA anyway
If i Can't Install it    I Don't need it   Joe
tourrob 
Member - Posts: 1
Member spacespace
Joined: February 17, 2010
Posted: February 18, 2010 at 1:11 AM / IP Logged  
I had the same EXACT problem in a 2006 cobalt, did both w2w and d2d, led turns off when programming as soon as I turn the ignition on.
I even emailed the FAQ section on the their website and no reply yet...
So, does the dlpkgm not bypass PK3?
This is the first chevy that I have worked on with electric powered steering and that does not have any heavy gauge wires going to the ignition key.
monty_77 
Copper - Posts: 491
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 15, 2009
Location: North Dakota, United States
Posted: February 18, 2010 at 3:06 PM / IP Logged  
the dlpkgm will only do the doors on a cobalt the better choice would of been the dlpk it will bypass the pk3 and the do the door locks
ropuma 
Copper - Posts: 102
Copper spacespace
Joined: February 16, 2010
Location: Illinois, United States
Posted: February 18, 2010 at 4:35 PM / IP Logged  

Look for Can-SL2

zerepdivad 
Silver - Posts: 605
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: July 03, 2006
Location: Wisconsin, United States
Posted: February 19, 2010 at 1:02 AM / IP Logged  
I used an xk06 on the 06 cobalts i've done with no issues whatsoever.
A DMM is a beautiful thing.
MECP Advanced Installer Certified.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer