python 872 le not starting

I installed the alarm in a 2005 Chevy Suburban, used a Xpresskit DLPKGM, connected with a D2D. Programed the bypass per instructions. Alarm seems to be working fine, alarm sets, doors lock, lights flash. But the remote start won't work. I've connected all the wires per schematics, but when I push remote to start it. I get a red error light on the key fob and control module clicks like a turn signal 7 times. (I don't know if that is a code or not). It seems to me like it's erroring out because of a tripped safety circuit or not seeing the bypass. I've disconnected the hood pin & the brake pedal wire, same results. I checked voltage at plug (purple & Green) during remote start, no power to plug/wires. I've gone thru everything I can think of. HELP! Wiring: H1 RED / WH - NC H1 RED - +RED IGN H1 BROWN -SIREN (WORKING) H1 WHITE/ BR - NC H1 BLACK - GROUNDED TO METAL H1 PURPLE - NC H1 BLUE - NC H1 GREEN - DLPKGM DOOR TRIGGER H1 BLACK/ WHT - NC H1 WHITE/ BLUE - NC H1 WHITE - NC H1 ORANGE - NC H2 - NOT PLUGGED IN H3 PINK - IGN PINK & DLPKGM TAPPED OF THIS WIRE H3 RED / WHT - IGN RED / WHT H3 ORANGE - ORANGE ACC H3 PURPLE - YELLOW STARTER (STARTER SIDE) H3 GREEN - YELLOW STARTER (KEY SIDE) H3 RED - IGN RED H3 PINK/WHT - IGN SWITCH WHITE H3 RED / BLK - IGN RED RS IN BLK/WHT - GROUND TO METAL PURPLE - TACH LEAD DLPKGM BROWN - WHITE BRAKE PEDAL WIRE GREY - HOOD PIN BLUE/WHT - NC RS OUT - NOT PLUGED IN DOOR LOCK - NOT PLUGGED IN

Sorry for the second post, I didn't see the first one got posted. Thanks to Monty_77 for solving the problem!