viper 5901 12volts

Just install a 5901 viper alarm to my 1997 honda civic ex..................got the remote start to work and everything But im still having some problems.......can 12volt help out ..................thanks

Problems

heres the diagram of the viper 5901 alarm/remote starter

https://img6.imageshack.us/img6/276/img0199m.jpg

i circle all the wiring that i couldnt fix and need help with

H1/4- WHITE/ BROWN PARKING LIGHT ISOLATION WIRE pin 87a on onboard rly (what is this wire for and do i need it)

H1/9- BLACK/ WHITE (-) 200mA DOME LIGHT SUPERVISION OUTPUT (cant find the wiring does anyone know were it located)

H1/10- WHITE/ BLUE (-) REMOTE START/TURBO TIMER ACTIVATION INPUT  (what should i do with is wire)

H1/11- WHITE PARKING LIGHT OUTPUT ( what is this wire used for and were can i find it.........in a honda civic 97 ex)

H3/7-  PINK/WHITE (+) IGNITION2/ FLEX RELAY OUTPUT (What i this wire used for)

h3/8 PINK/BLACK (+) FLEX RELAY INPUT 87A KEY SIDE ( What is this wire used for)

H2/11 to H2/14 on the chart what are these wire used for and do i need them

also car that the alarm is going in to is a 97 honda civic ex 5 speed

WHITE/ brown- unused

BLACK/ white- unused

WHITE/ blue- unused

white- this is your parking light wire, and also the reason yoru lights aren't blinking with the alarm!

Pink/white- ignition 2!

Pink/black- unused!

The h2 harness wires you refer to are also unused!

so all i need to do is run h3 pink/white wire to the h3 RED / white and that it

and the viper 5901 comes with a 12mins remote start time how can i ajust that

No the pink/white would connect to the ignition 2 wire in the car which is yellow like i posted above!

To adjust the runtime

Turn ignition on the off

press and hold the valet switch until you hear three chirps

then press the valet switch 5 times hold on the fifth press

there are three settings

1chirp setting- 12mins (default)

2 chirp- 24mins

3 chirp- 60 mins (Which is really overkill in my opinion!)