1999 suburban won't start viper 5900

Home / the12volt's Install Bay / Car Security and Convenience / 1999 suburban won't start viper 5900 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

b0dypart69

Member - Posts: 8

Joined: May 02, 2006

Location: United States

Posted: March 03, 2010 at 12:19 PM / IP Logged

My '99 Suburban will not start.

When it start either by remote or by key it starts for about a sec. and dies.

Does this have something to do with the Bypass module?

Thanks

b0dypart69

Member - Posts: 8

Joined: May 02, 2006

Location: United States

Posted: March 03, 2010 at 2:05 PM / IP Logged

I suspect it was understood but, some people might be confused...

If i use the key or if i use the remote it doesn't matter same result...

matthewjon

Member - Posts: 40

Joined: January 27, 2010

Location: Minnesota, United States

Posted: March 03, 2010 at 3:02 PM / IP Logged

did you have to cut the starter wire? if so, are you sure that the key side/starter side arent mixed up?

my noob guess.

matthewjon

Member - Posts: 40

Joined: January 27, 2010

Location: Minnesota, United States

Posted: March 03, 2010 at 3:06 PM / IP Logged

matthewjon wrote:

disregard last post

it actually starts, but just for a second.

b0dypart69

Member - Posts: 8

Joined: May 02, 2006

Location: United States

Posted: March 04, 2010 at 8:39 AM / IP Logged

well i removed the alarm "brain" and reinstalled it and the truck started fine, not sure maybe a loose wire or for some reason the alarm needed reset... I have had it installed for over 2 years and this is the first time having anyproblem...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 suburban won't start viper 5900

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.