dlpkgm programming

Home / the12volt's Install Bay / Car Security and Convenience / dlpkgm programming (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kencat21

Member - Posts: 12

Joined: July 06, 2006

Location: United States

Posted: March 08, 2010 at 11:54 AM / IP Logged

Hello, I recently purchased an dlpkgm and clifford 50.7x. I have been trying to program it to a 2000 Jeep Grand cherokee using D2D.

When I first tried to program it, I didn't realize I had to change the jumper settings on the 50.7x. So I tried to program it over and over to no avail.

Now that I have changed those settings, it still is not programming.

I have the power, ground and siren wired on the alarm and tach sense from the dlpkgm. I followed plan 6 and have the pink and pink/white wired to the non transponder side of ignition and the pink/black wired to the transponder side. And I have the purple data output wired to the yellow/purple wire from my car.

I noticed that in the manual it states that chrysler vehicles can only be programmed 5 times max. Could that be the problem? Is there any way around that? Any help would be greatly appreciated.

Back to Top

buddholly

Copper - Posts: 244

Joined: August 24, 2006

Location: United States

Posted: March 10, 2010 at 1:00 PM / IP Logged

I do believe the DLPKGM will only do door locks, tach and a couple of other things. You probably need a different interface module, an XK01 should work.

Back to Top

kencat21

Member - Posts: 12

Joined: July 06, 2006

Location: United States

Posted: September 04, 2010 at 11:26 PM / IP Logged

any more insight about the chrysler programming limitations?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dlpkgm programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.