trunk release / 530t / aux

Home / the12volt's Install Bay / Car Security and Convenience / trunk release / 530t / aux (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

risc

Member - Posts: 1

Joined: March 26, 2003

Location: United States

Posted: April 11, 2003 at 2:56 PM / IP Logged

I have a Hornet 554t installed in my 03 Mustang. I originally wired the trunk release to the aux and everything was fine. I have since added a 530t that I have wired to the aux so that I can vent and roll my windows down via remote. Inorder to get my trunk release back I wired it to the progressive secondary door unlock, two clicks of unlock in 10 secs and the trunk pops, one click and just the doors unlock.

My problem now is that after you drive the car and turn it off the trunk pops when the alarm unlocks the doors. Is this just an diode isolation issue? Or can I not wire the alarm this way? Can anyone suggest a better way of wiring the trunk release along with the 530t module? I suppose I could disable the auto lock/unlock w/ ignition feature, but I would rather fix the problem at it's source.

Thanks,

Jeff

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 11, 2003 at 3:52 PM / IP Logged

The problem is that the igniton controlled locks is turned on, turn this feature off then it will work the way it is hooked up. You could also hook it up to the fourth channel output(I think your alarm has this).

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

x6369x

Copper - Posts: 108

Joined: November 10, 2002

Location: United States

Posted: April 11, 2003 at 10:58 PM / IP Logged

The 554T has a total of 3 outputs, 2 of which are optional:

chan 2 (RED / white, main harness) = constant negative for as long as the button is held after 1.5 seconds,

chan 3 (internal) = remote start,

chan 4 (violet/black, 3 pin harness) = programmable output.

In you situation, I would wire/program the trunk release to chan 2 and the 530T to chan 4. I have done this plenty of times.

Friends Don't Let Friends Bump Stock.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trunk release / 530t / aux

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.