96 plymouth voyager, power windows

I have a 96 Plymouth Voyageur mini/van. It was built without power windows. The front doors got very corroded & I replaced them with 2 front doors off of a 1999 Plymouth van. These doors have power windows & power door locks. I have no modules or relays & the body computor is not set up for any power accessories on the 96 van. Can I wire it up (the 96) with just relays? It does not have to look good, just functional. I use it for a winter beater & summer boat mover. I have a Ford Fusion Hybrid, which I don't drive in the winter & I can't tow with. I need a simple schematic, hopefully just using switches & relays. Thanks. B. Farmer.J Farmer

Yes you can it do this with just switches and relays!commit your way to jehovah and he will act in your behalf. psalms 37:5

The above relay setup would work for all the door locks, and for each window you would need to have the same setup individually! On the diagram where it says to the actuators. these would go to the window motor wires!commit your way to jehovah and he will act in your behalf. psalms 37:5

t&t tech: Thanks so much for the prompt response. Now I can see how to wire the circuits. J. Farmer

J Farmer