autopage c3 rs 665 2w, 2004 trailblazer

I hvae a 2004 Chevy Trailblazer that I'm going to install the "Autopage C3-RS-665-2W" on. I have done 2 alarms in the past so I'm pretty new still. I was told to buy a GMDLBP in order to start and lock/unlock. Does anyone have an installation manual on this alarm or how to hook it up?

I was looking for the Autopage C3-RS-665-2W installation manual.

I was looking for the Autopage C3-RS-665-2W installation manual. I am installing it on a 2004 Chevy Trailblazer.

I have a 2004 Chevy trailblazer. I installed an Autopage C3rs6652w, but I could not get the remote start to work. I installed the GMDL-BP unit for and the locks and everything else works fine. The weird thing is that even if I turn the key to the "on" position and give the starter wire power, nothing happens. It does not crank at all. Is there maybe 2 different wires that require 12 volts while starting. I have power going to ignition 1 as well as ignition 2, but even with the key turned I can't get it to crank. 

I have a 2004 Chevy trailblazer. I installed an Autopage C3rs6652w, but I could not get the remote start to work. I installed the GMDL-BP unit for and the locks and everything else works fine. The weird thing is that even if I turn the key to the "on" position and give the starter wire power, nothing happens. It does not crank at all. Is there maybe 2 different wires that require 12 volts while starting. I have power going to ignition 1 as well as ignition 2, but even with the key turned I can't get it to crank. 

did you program the GMDLBP? there are 2 different programming steps. the first is for the locks and the 2nd step programs the module for the Passlock2 bypass

All I did was program the way it said on the manual. with the key out. The light is solid then start the car and the light will go out indicating it was programmed.