gmc / isuzu truck remote start

Home / the12volt's Install Bay / Car Security and Convenience / gmc / isuzu truck remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nelson_alc

Member - Posts: 4

Joined: September 12, 2007

Location: New York, United States

Posted: June 28, 2010 at 10:35 PM / IP Logged

Hello I have problem installing a Viper 5901 to a GMC (Isuzu) Truck W5500 Diesel (Big commercial truck)..

The problem is that I have found all the wires correct for the remote starter (12v, Starter, Ignition, Accessory) but the truck try to start and do not stay on or stay on but shaking like there is no gas.

In the ignition switch there is 3 more wires:

Blue - Rest in ground and send 12v when you open the ignition for 1/2 a second and go back to ground.

Blue/white - Rest in 12v and go to ground when you open ignition.

Blue / YELLOW- Rest in ground and go to 12v when you open ignition.

All of this wires are in the ignition switch.

Everything in the installation of the alarm is correct I think that this have something to do with the glow plugs or something else..

I already try opening this wire or closing it with relays in the wires in the harness but no luck.

Thanks any of you for your help...

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 29, 2010 at 7:24 AM / IP Logged

What does each wire do when you have it in the crank position?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

nelson_alc

Member - Posts: 4

Joined: September 12, 2007

Location: New York, United States

Posted: June 29, 2010 at 3:07 PM / IP Logged

In the crank position the blue wire stay in ground, the blue / YELLOW in 12v and the Blue/White in Ground, They only change in the on position but not in the crank position.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

gmc / isuzu truck remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.