viper 5901 lc3 in a 94 civic

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 lc3 in a 94 civic (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nbboy7

Member - Posts: 19

Joined: July 09, 2006

Location: United States

Posted: June 29, 2010 at 5:11 PM / IP Logged

Ok i have everything hooked up but the heavy set wires. I have no clue how to hook them up to the car. The instructions are confusing me. Can anyone tell me tell me what colors of the alarm wires go to colors in the car please. Thanks

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: June 29, 2010 at 5:34 PM / IP Logged

pull up a wiring diagram, then test your wires.

the output wires on the viper simply go to the wires at the ignition.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: June 30, 2010 at 6:13 AM / IP Logged

1994 Honda Civic Alarm, Remote Starter, Keyless Entry Wiring Information
Constant 12V+	White	Ignition Switch Harness
Starter	BLACK/ White	Ignition Switch Harness
Ignition	BLACK / YELLOW	Ignition Switch Harness
Accessory	Yellow	Ignition Switch Harness
Tach	Blue	Distributor
Brake Switch	GREEN / WHITE	Brake Switch
Trunk Pin	GREEN/ Black (-)	Above Fuse Panel Blue Connector
Parking Lights	RED / Black	Fuse Panel or Driver's Kick Panel
Head Lamp	RED / White	Steering Column
Hood Pin	n/a
Door Trigger	Light GREEN/ Red (-)	Driver's Running Board One of Two Wires
Door Lock	GREEN / WHITE (-)	2 Pin Connector TapeD to Blue Connector behind Fuse Panel
Door Unlock	GREEN/ Red (-)
Horn Wire	Blue (-)	Steering Column, use Relay
Windows Up	LF=RED / Blue, RF=Blue / YELLOW
Windows Down	LF=RED / Yellow, RF=Blue/Green

commit your way to jehovah and he will act in your behalf. psalms 37:5

nbboy7

Member - Posts: 19

Joined: July 09, 2006

Location: United States

Posted: July 01, 2010 at 8:05 PM / IP Logged

I dont know where some of them go. Some of the viper wire say in/out put. Then the flex relay wires is geting me confused. So far i have the starter wires and the accessory output on. The rest I'm confused about and i need my car.

H3/1 PINK (+) IGNITION 1 INPUT/OUTPUT

H3/2 RED / WHITE (+) FUSED (30A) IGNITION 2 / FLEX RELAY INPUT 87

H3/3 ORANGE (+) ACCESSORY OUTPUT

H3/4 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL)

H3/5 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL WIRE)

H3/6 RED (+) FUSED (30A) IGNITION 1 INPUT

H3/7 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT

H3/8 PINK/BLACK (+) FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY

H3/9 RED / BLACK (+) FUSED (30A) ACCESSORY/STARTER INPUT

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: July 01, 2010 at 9:27 PM / IP Logged

On your Heavy Gauge Harness, Refer to the Wiring Chart posted from t&t tech, use a DMM to test and verify the wires you will be using

The Red (H3/6) and RED / Black (H3/9) should go to the White. Constant 12 volts. You could also attach the Red (H1/2) wire there.

The Pink (H3/1 to the BLACK / YELLOW

The Orange (H3/3) to the Yellow

The Starter wire BLACK/ White will get cut and connected as: The Violet (H3/4) to the starter side of that wire and the Green (H3/5) to the key side of the starter wire.

The (H3/2) RED / White, (H3/7) Pink/White, and the (H3/8) Pink/Black) will not be needed. Fold them up and tuck them away.

Solder those connections. Good Luck.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 lc3 in a 94 civic

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.