no momentary button on viper 300 alarm

Home / the12volt's Install Bay / Car Security and Convenience / no momentary button on viper 300 alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mejia2

Member - Posts: 1

Joined: July 13, 2010

Location: California, United States

Posted: July 13, 2010 at 11:34 PM / IP Logged

I have a 95 chevy astro with a Viper 300 alarm I need to program the remote but I found there is no momentary button to enter the codes. Does anyone know what i need to do to program my remote???

raul

Back to Top

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: July 14, 2010 at 5:20 AM / IP Logged

You will have to access the button. If your installer did not put it in you will need to either buy one or make your own. There should be a 2 pin blue port on the brain that needs to be shorted out each time the button is pressed.

Kevin Pierson

Back to Top

itsyuk

Silver - Posts: 505

Joined: February 23, 2010

Location: United States

Posted: August 09, 2010 at 12:59 AM / IP Logged

i have a really really old 300 that uses the gray wire hooked to the valet switch. it was made before the days of blue port.

its kinda funny.. the installation instructions were a single piece of paper about 5x7 inches.

remote had about a 35 foot range.

yuk

quiet rural missouri, near KC.

If your system moves you physically and not emotionally, you have wasted your money.

Back to Top

flhunter

Member - Posts: 12

Joined: August 01, 2010

Posted: August 09, 2010 at 2:55 AM / IP Logged

Use the valet switch to program. just toggle it on-off. This is the same as to push momentary button.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

no momentary button on viper 300 alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.