autopage

Home / the12volt's Install Bay / Car Security and Convenience / autopage (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

and0b

Member - Posts: 27

Joined: October 29, 2010

Location: Illinois, United States

Posted: October 29, 2010 at 10:49 PM / IP Logged

I bought remote starter of Autopage C3-RSTKE-900, but I think I made mistake. I'm inquiring by phone(living messages ) and email with their Customer Support(???) but they just ignore me. I'm not sure which Bypass Module will work with this RS, which one will be the best. Can someone help me with that? I have Mercury Mariner 2007.

Andrew

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: October 30, 2010 at 2:01 AM / IP Logged

DEI do either the CANMAX 400 (Ford 1 V1.0) or DB-AL (401 V1.01).

The first is an immobiliser + giving you many of the R/S functions without having to wire all around the vehicle. The second is cheaper just giving you the b-pass you require.

Autopage use idatalink. Go to their web page.

kreg357

Platinum - Posts: 7,787

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: October 30, 2010 at 9:17 AM / IP Logged

Most manufactures will only support authorized dealers. That could be why you aren't getting a response.

The Autopage remote start should be D2D compatible with the iDatalink bypass modules. Look for an ADS-TBSL TI bypass module. All of the iDatalink moduiles listed for your car will only take care of the PATS3 immobilizer. Aws Howard suggested, here is a link to the iDatalink web site for more info and to download their install guide. http://www.idatalink.com/helpdesk/

Any bypass module will work with the Autopage unit in W2W mode. Other bypass choices are PKFM, PKALL and KEY-OVERIDE-ALL. There are other bypass modules available but they require a special USB cable to program with the correct firmware ( the ones listed above don't ).

Soldering is fun!

and0b

Member - Posts: 27

Joined: October 29, 2010

Location: Illinois, United States

Posted: October 30, 2010 at 9:39 AM / IP Logged

Thank you for quick reply. I was checking IDatalink website but there is 8 Bypass Modules which will fit my car, but which will work with my RS? Pictures shows so some of them looks like memory cards, I'm not sure where I can insert them - to the car or RS.

Thank you

kreg357

Platinum - Posts: 7,787

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: October 30, 2010 at 9:59 AM / IP Logged

The long answer is: The Solo series will work and will come with the correct firmware pre-loaded. The Multi series will work but you must first program ( flash ) them with the correct firmware for your application with the special USB cable. The Blade series are for Compustar remote starters ( CM5x00 and CM6x00 ) only.

The SOLO series ADS TBSL TI or the ADS TBSL KO would be the best / least expensive bypass' for you from iDatalink.

Soldering is fun!

and0b

Member - Posts: 27

Joined: October 29, 2010

Location: Illinois, United States

Posted: October 31, 2010 at 10:40 AM / IP Logged

Thank you Kreg357.

Andrew

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

autopage

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.