automate 6hf rem start crank time issue

Home / the12volt's Install Bay / Car Security and Convenience / automate 6hf rem start crank time issue (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

chinamanpat

Member - Posts: 6

Joined: January 27, 2008

Location: New Jersey, United States

Posted: November 03, 2010 at 3:49 PM / IP Logged

hey all, im having a problem with my really old automate 6hf alarm/remote start/keyless entry unit.

i believe its close to the viper 140hf as well, but anyway, i can't find the installation manual anywhere for this and out of no where i went to remote start my car and the cars crank time is set too long ( the car will start and the starter will still spin until i disengage the remote start) but if i start the car with the key, its fine. does anyone know how to reset the crank time to .6 seconds?? my alarms brain is so old it doesnt have an input for a bitwriter!!

Back to Top

chinamanpat

Member - Posts: 6

Joined: January 27, 2008

Location: New Jersey, United States

Posted: November 03, 2010 at 3:50 PM / IP Logged

this is in a 98 nissan maxima

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

automate 6hf rem start crank time issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.