idatalink connected to security led

Home / the12volt's Install Bay / Car Security and Convenience / idatalink connected to security led (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sean11901

Copper - Posts: 118

Joined: March 05, 2010

Posted: November 13, 2010 at 11:57 AM / IP Logged

when cutting the wire for te security led in an 07 infiniti g35x PTS should the security led in the cluster stop flashing? i just want to make sure i ahve the corresct wire.

Back to Top

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: November 13, 2010 at 12:25 PM / IP Logged

Your meter has the answer to your question. If you meter the wire it will show ground pulse with the light flash. If you cut the sec. light wire and now it no longer flashes, most likely you have the right wire but your meter will give you assurance you have the right wire.

Advanced

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 13, 2010 at 2:39 PM / IP Logged

I have to say this is hard to test with a DVM. The flash is so fast it simply doesn't show up. I have been kinda bitchin to Idatalink about this on the new Toyota TL2 software as they don't tell you the exact location of the security light wire. Fortunately on your car it is clear of the location, orange wire in a 40 pin plug at the BCM.

On this car and all Nissan's, the security light will stop flashing when this wire is cut.

Mike M2

Tech Manager

CS Dealer Services

Back to Top

sean11901

Copper - Posts: 118

Joined: March 05, 2010

Posted: November 13, 2010 at 2:44 PM / IP Logged

Mike M2 wrote:

I have to say this is hard to test with a DVM. The flash is so fast it simply doesn't show up. I have been kinda bitchin to Idatalink about this on the new Toyota TL2 software as they don't tell you the exact location of the security light wire. Fortunately on your car it is clear of the location, orange wire in a 40 pin plug at the BCM.

On this car and all Nissan's, the security light will stop flashing when this wire is cut.

What I've noticed is that if you do a continuity test with the dmm on the wire and the other prob on a ground the light will turn constant. That's how I tested mine.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

idatalink connected to security led

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.