2010 equinox remote start issues

Home / the12volt's Install Bay / Car Security and Convenience / 2010 equinox remote start issues (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

autoobsessionny

Member - Posts: 11

Joined: December 29, 2005

Location: United States

Posted: November 18, 2010 at 7:53 PM / IP Logged

I installed a compustar remote starter today combined with an fortin evo-all with software 2.07.

The evo programmed fine and the system remote starts just fine. The system however is not disarming the factory security system all the time.

The door locks are hooked up from the remote starter to the evo-all and the lock and unlock feature from the new controller do arm and disarm the alarm when used.

I also have the factory alarm disarm wire hooked into the unlock wire to make sure it gets a pulse before it starts but it still gets set off.

Any ideas would help.

Auto Obsession

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 21, 2010 at 4:08 PM / IP Logged

Did you change setting 4-11 to option 2 ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 equinox remote start issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.