the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

avital 4003 blue wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
megatfauzi76 
Copper - Posts: 93
Copper spacespace
Joined: December 14, 2006
Location: Malaysia
Posted: December 08, 2010 at 7:02 PM / IP Logged  

Hai,

Im planning to install Remote Start Add On Avital 4003. The problem, I need a constant -ve output before the remote start activate so that it can activate my IMMOBILIZER first before it start to turm on my Accesories and Cranking.

I saw one wire at the avital 4003 wiring diagram. Its a Blue (-) 200ma Status Output. Can i use this wire to activate my immobilzer or this wire only supply -ve output after it start to turn on my accesories?

Thanks

chev104275 
Gold - Posts: 1,427
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: December 08, 2010 at 7:19 PM / IP Logged  
Status output is the correct wire to activate the bypass
If i Can't Install it    I Don't need it   Joe
megatfauzi76 
Copper - Posts: 93
Copper spacespace
Joined: December 14, 2006
Location: Malaysia
Posted: December 08, 2010 at 10:32 PM / IP Logged  

The sequence..

When I pulse the remote start...Blue Wire ( status output ) will supply -ve output....

A few mili second after that..autostart will activate..start my accesories than..cranking...am i rite?

Thanks

chev104275 
Gold - Posts: 1,427
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: December 09, 2010 at 5:11 AM / IP Logged  
Status output first then the ing turns on then acc turns on    Then acc drops out and starter engages then acc comes back on
If i Can't Install it    I Don't need it   Joe
megatfauzi76 
Copper - Posts: 93
Copper spacespace
Joined: December 14, 2006
Location: Malaysia
Posted: December 10, 2010 at 2:03 AM / IP Logged  
Thank you for the information

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer