au 93 window roll up trouble

Home / the12volt's Install Bay / Car Security and Convenience / au 93 window roll up trouble (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

homeinstaller

Member - Posts: 6

Joined: September 29, 2010

Location: United States

Posted: December 09, 2010 at 9:06 AM / IP Logged

I have an au-93 in a 98 monte carlo hooked up to a 350 viper alarm. when i arm the drivers window rolls up all the way but the passangers window moves up an inch or so then stops. i spliced between switch and motor . the au-93 is an older model with no adjustments for increasing or decreasing the power to the motor.

could anyone help ? thank you.

first post hope i did it right.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 09, 2010 at 1:30 PM / IP Logged

Try a thicker power lead directly to the battery fused at the battery, also a thicker ground return pref to a really good ground, that is measure the resistance between batt neg and your grounding point, should be 1 ohm or less.

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: December 09, 2010 at 5:25 PM / IP Logged

That unit rolls one window at a time so it really doesn't require a large power source and since it's doing the driver window i think the power and ground's ok, the unit will stop if the windows are to stiff.

Back to Top

homeinstaller

Member - Posts: 6

Joined: September 29, 2010

Location: United States

Posted: December 09, 2010 at 6:34 PM / IP Logged

I tested my power sources . And all tested good . Next I oiled the window tracks ,manually ran the window a few times ,than I tested the au-93 ,and yes the window works now . Thank you guys. I thank you for your time. au 93 window roll up trouble -- posted image.

au 93 window roll up trouble -- posted image.

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: December 10, 2010 at 8:19 PM / IP Logged

Works every time. au 93 window roll up trouble -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

au 93 window roll up trouble

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.