bypass on '07 pontiac g6

Home / the12volt's Install Bay / Car Security and Convenience / bypass on '07 pontiac g6 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tombosley

Member - Posts: 5

Joined: December 21, 2010

Posted: December 21, 2010 at 11:52 AM / IP Logged

I am installing a remote start on wifes car. First off, bad idea. Things went well, until time for the bypass. I am driving myself up a wall trying to get the bypass module hooked up on a 07 G6. Is there a picture out there somewhere where to locate these wires? any help is greatly appreciated, her car is in pieces,

tombosley

Member - Posts: 5

Joined: December 21, 2010

Posted: December 21, 2010 at 12:32 PM / IP Logged

I think i have located the pin harness for the remaining wires but absolutely ridiculous location? waaay up under the dash past the ignition clip? is this right?

please help. wife getting mad

kreg357

Platinum - Posts: 7,787

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 21, 2010 at 4:58 PM / IP Logged

It would help to know which bypass module and remote starter you are using. The connections should be at the Main Ignition Harness and the OBD2 connector. White wire is Passlock2, Brown wire is ACC and Pink wire is IGN.

Soldering is fun!

tombosley

Member - Posts: 5

Joined: December 21, 2010

Posted: December 21, 2010 at 5:06 PM / IP Logged

Bypass is xk06 got a few hooked up on small green plug. But couple others need black six pin connector. Please help

kreg357

Platinum - Posts: 7,787

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 21, 2010 at 5:28 PM / IP Logged

Remove lower steering column clam shell cover for access. This info from the PKG7 install guide :

These connectors are located in back of the ignition switch.

Should be right there. Does your ignition key have a PK3 or a "+ in a circle" stamped on it? Here is a link to Bulldog Security. http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp Look up your car. They have some pictures to help locating some of the necessary wires.

Soldering is fun!

tombosley

Member - Posts: 5

Joined: December 21, 2010

Posted: December 21, 2010 at 6:25 PM / IP Logged

system is all hooked up but will not work. all wires are good but were not getting power to bypass or scytek system. the red wires going into the brain unit are getting power but no lights on on the bypass or antenna. any ideas?

kreg357

Platinum - Posts: 7,787

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 21, 2010 at 7:02 PM / IP Logged

Sorry, not familiar with the SkyTek systems at all.

Soldering is fun!

tombosley

Member - Posts: 5

Joined: December 21, 2010

Posted: December 21, 2010 at 7:09 PM / IP Logged

Car will remotely start but won't shut off. Even with key or brake pedal. Only way is to unplug bypass. So close any Masters out there know problem?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bypass on '07 pontiac g6

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.