the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

prestige aps 787c, 2011 mazda 3

Home / the12volt's Install Bay / Car Security and Convenience / prestige aps 787c, 2011 mazda 3 (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
Raymond4646 
Copper - Posts: 121
Copper spacespace
Joined: July 10, 2005
Posted: December 30, 2010 at 10:34 AM / IP Logged  
Does anyone have a tech sheet for a 2011 Mazda 3.  Installing a Prestige Aps787c  Any know issues with this vehicle? Thanks for any assistance.
Raymond4646 
Copper - Posts: 121
Copper spacespace
Joined: July 10, 2005
Posted: December 30, 2010 at 1:59 PM / IP Logged  
Need a wiring diagram for a 2011 Mazda 3 remote start install. Also what bypass works best? Thanks.
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: December 30, 2010 at 4:44 PM / IP Logged  
Battery YELLOW & ORANGE (+) IGNITION SWITCH HARNESS...EACH OF THESE WIRES IS FUSED AT 40 AMPS prestige aps 787c, 2011 mazda 3 -- posted image.
prestige aps 787c, 2011 mazda 3 -- posted image. Ignition 1 BLUE (+) IGNITION SWITCH HARNESS
prestige aps 787c, 2011 mazda 3 -- posted image. Accessory 1 PINK (+) IGNITION SWITCH HARNESS
prestige aps 787c, 2011 mazda 3 -- posted image. Accessory 2 WHITE (+) IGNITION SWITCH HARNESS
prestige aps 787c, 2011 mazda 3 -- posted image. Starter 1 LIGHT GREEN (+) IGNITION SWITCH HARNESS
prestige aps 787c, 2011 mazda 3 -- posted image. Anti-Theft Type UNIVERSAL IMMOBILIZER
prestige aps 787c, 2011 mazda 3 -- posted image. Anti-Theft Descript THE KEY SENDS AN RF SIGNAL TO THE BCM MODULE THROUGH AN ANTENNA LOCATED AROUND THE IGNITION CYLINDER
prestige aps 787c, 2011 mazda 3 -- posted image. Key Sense LIGHT BLUE (+) IGNITION SWITCH HARNESS
prestige aps 787c, 2011 mazda 3 -- posted image. Tachometer ...USE INJECTOR WIRE prestige aps 787c, 2011 mazda 3 -- posted image.
prestige aps 787c, 2011 mazda 3 -- posted image. Speed Sense ORANGE (AC) RADIO HARNESS
prestige aps 787c, 2011 mazda 3 -- posted image. Parking Lights ORANGE (+) IN HARNESS IN DRIVER KICKPANEL TO REAR
prestige aps 787c, 2011 mazda 3 -- posted image. Low Crr. Pk Lights GRAY (-) BCM MODULE...ALSO AT LIGHT SWITCH HARNESS prestige aps 787c, 2011 mazda 3 -- posted image.
prestige aps 787c, 2011 mazda 3 -- posted image. Brake Lights GREEN (+) SWITCH ABOVE BRAKE PEDAL
prestige aps 787c, 2011 mazda 3 -- posted image. Reverse Lights WHITE (+) IN HARNESS IN DRIVER KICK PANEL
prestige aps 787c, 2011 mazda 3 -- posted image. Horn BLUE (-) HARNESS AT STEERING COLUMN
prestige aps 787c, 2011 mazda 3 -- posted image. CANbus GREEN & GRAY (DATA) OBD II CONNECTOR...THESE ARE CAN MEDIUM SPEED CAN HIGH AND LOW RESPECTIVLY
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: December 30, 2010 at 4:46 PM / IP Logged  
Headlights-Lo BROWN (-) BCM MODULE...ALSO AT LIGHT SWITCH HARNESS prestige aps 787c, 2011 mazda 3 -- posted image.
prestige aps 787c, 2011 mazda 3 -- posted image. All Hazrd Lights WHITE (-) BCM MODULE
prestige aps 787c, 2011 mazda 3 -- posted image. Parking Brake VIOLET (-) BCM MODULE
prestige aps 787c, 2011 mazda 3 -- posted image. Trnk Release BROWN (-) BCM MODULE
   
t&t tech 
Platinum - Posts: 2,608
Platinum spacespace
Joined: October 05, 2008
Location: Trinidad and Tobago
Posted: December 30, 2010 at 4:47 PM / IP Logged  
The above is 2010. Here is a link to the entire thread if you wanna browse.
Raymond4646 
Copper - Posts: 121
Copper spacespace
Joined: July 10, 2005
Posted: January 05, 2011 at 12:12 AM / IP Logged  

Installing a Prestige APS787C into an 2011 Mazda 3.  Using the (-) Light Blue 300ma ground out while running to give a (-) GWR Status input to the Dball.. Does this need a relay to protect the low 300ma output of the Remote Start?  Im assuming it doesn't, just being precautious.

kreg357 
Platinum - Posts: 7,783
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: January 05, 2011 at 5:39 AM / IP Logged  
No relay required, connect directly between the R/S and bypass.    If you are using the R/S GWR output for other things besides the bypass, then diode isolation is required.
Soldering is fun!
Raymond4646 
Copper - Posts: 121
Copper spacespace
Joined: July 10, 2005
Posted: January 05, 2011 at 11:55 AM / IP Logged  
Thank you Kreg
Raymond4646 
Copper - Posts: 121
Copper spacespace
Joined: July 10, 2005
Posted: January 05, 2011 at 11:15 PM / IP Logged  
Can anyone point me in the right direction as to where the door trigger and dome light wires are? I've been testing the 2 blue bcm plugs and only found the key light..this car is kicking my ass..thanks for any assistance..
scam404 
Copper - Posts: 113
Copper spacespace
Joined: November 07, 2009
Location: Virginia, United States
Posted: January 05, 2011 at 11:31 PM / IP Logged  
they have the wires you need here:
http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp
go to mazda -> mazda 3, 2009-2010, i know they have the years wrong... but thats the one you need.
Page of 4

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer