2004 nissan pathfinder

Home / the12volt's Install Bay / Car Security and Convenience / 2004 nissan pathfinder (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ricardoboston

Copper - Posts: 268

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: January 09, 2011 at 11:53 AM / IP Logged

hi guys ,need some help to hook up a xk05 pkn2 need to know what wire color goes to hook up with the bypass and location thanks

kreg357

Platinum - Posts: 7,786

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 09, 2011 at 7:46 PM / IP Logged

The transponder connector in your Pathfinder is the 8 Pin style.

On the XK05

Brown wire goes to Remote starter (-) Status Output (aka GWR, Ground While Running, etc)

Black wire goes to chassis ground

Red wire goes to +12v constant thick WHITE/ Red @ ignition harness

Pink/White wire goes to WHITE/ Black Ignition wire at Pin 7 of 8 Pin connector - cut wire Key side

Blue and Pink wires go to WHITE/ Black Ignition wire at Pin 7 of 8 Pin connector - cut wire ECM side

Violet wire goes to PURPLE / Red wire at Pin 1 of 8 Pin connector

Soldering is fun!

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: January 10, 2011 at 6:23 AM / IP Logged

how about the security light? do i need to hook up? if i do have to hook up it what wire goes there thanks

kreg357

Platinum - Posts: 7,786

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 10, 2011 at 7:50 AM / IP Logged

The XK05 with PKN2 firmware has to provisions for the Security LED like other brands of bypass

modules. Here is a note from iDatalink concerning the Security LED :

SECURITY LED WIRE IS PRESENT ONLY
IF VEHICLE IS EQUIPED WITH THEFT
SECURITY LED. IF WIRE IS NOT PRESENT,
SECURITY LED WIRE CONNECTIONS ARE NOT
REQUIRED.

If you have Factory Theft Security and the Security LED is an issue, you could set up a relay to

open the the Security LED wire during remote start using GWR as the relay control. The Security LED

is a Brown wire at Pin 5 of that same 8 Pin connector.

Soldering is fun!

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: January 10, 2011 at 11:08 AM / IP Logged

thanks a lot but how to get it connected ?how to wire a relay for it ,im just whant to do it right thanks again

kreg357

Platinum - Posts: 7,786

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 10, 2011 at 11:47 AM / IP Logged

What brand and model of remote starter?

Soldering is fun!

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 10, 2011 at 2:04 PM / IP Logged

to break the continuity on the security light

85 - gwr

86 - constant 12v

87a - security light bcm side

30 - security light cluster side

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: January 10, 2011 at 8:12 PM / IP Logged

you re the best ,works perfect i did like you said ,thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 nissan pathfinder

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.