troubleshoot 04 durango

Home / the12volt's Install Bay / Car Security and Convenience / troubleshoot 04 durango (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

delco_installer

Member - Posts: 36

Joined: November 23, 2009

Location: Pennsylvania, United States

Posted: February 03, 2011 at 10:11 AM / IP Logged

I recently installed an autopage rs603 and iDatalink ADS-DL-SL-CA2 in this 04 Durango after testing everything was good but the customer is telling me that the factory alarm is going off when the car is remote started, also he states that there is a light on his dash I am not sure what the light is but if anyone could give me some ideas on how i can trouble shoot this I would really appreciate it.

Thanks

Mike

Back to Top

Search for other posts by delco_installer

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 03, 2011 at 10:51 AM / IP Logged

The iDatalink module turns off the factory alarm with the unlock command from the remote starter. Did you program / set the remote starter to "unlock before and lock after start"?

Did you connect the remote starter to the vehicles Keysense wire? iDatalink install guide says that Keysense is required.

Soldering is fun!

Back to Top

delco_installer

Member - Posts: 36

Joined: November 23, 2009

Location: Pennsylvania, United States

Posted: February 03, 2011 at 10:58 AM / IP Logged

I did not hook up the keysense wire and I believe the remote start is set to lock before start

Mike

Back to Top

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: February 04, 2011 at 3:44 PM / IP Logged

keysense will solve the alarm going off issue. use your GWR to trigger it. its (-) PURPLE / tan at the ignition harness. as far as the "light" on on the dash did you hook up the 2nd accessory pink/purple? most Dodge's will throw idiot lights if all IGN/ACC wires arent powered

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

troubleshoot 04 durango

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.