need to disable alarm

Home / the12volt's Install Bay / Car Security and Convenience / need to disable alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

phillyandcars

Member - Posts: 1

Joined: February 08, 2011

Location: Ohio, United States

Posted: February 08, 2011 at 2:57 PM / IP Logged

Can anyone assist me with disabling an after market alarm. i have a 1990 plymouth acclaim, the alarm that was installed in it no longer works the circuit board inside the alarm is no good. the issue is i hvae unhooked the alarm and hooked the starter wire back up to the ignition, however when i crank the car over there is no spark or no fuel. what other wires need to be hooked back up properly besides the starter wire. basically how do i rewire the car without the alarm being hooked up

phillipvaughan

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: February 08, 2011 at 4:01 PM / IP Logged

do you have igniton or a fuel pump cut? Did the car start fine before? Look for two wires of the same colour and gauge that are around the area you connected the starter wire and the run to the fuel pump.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need to disable alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.