Horn Honk Help

i have a 93 jeep grand cherokee. i have the clifford matrix rs3 alarm/remote start installed. im trying to hook up my alarm so that it uses the horn honk feature instead of the siren. the brown wire (siren output) has a + charge, while the horn wire underneath the stearing collum has a - charge. i ran the brown wire to the horn wire, but it doesnt sound the horn at all. how can i get this to work? thanks a lot

make sure you have a good connection. try using a relay on the inside of the car..... brown wire of the alarm to pin 85 pin 30 to the horn wire 86 and 87 ground.Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt